Answers are grounded in this paper and cite their sources.
In this work, domestic PAN‐based T700 carbon fibers (CF; “T” denotes tensile‐strength grade, nominal tensile strength ≥ 4900 MPa, monofilament diameter ~7 μm) were activated by nitric acid carboxylation to generate abundant polar oxygen‐containing functional groups on fiber surfaces. AK (aldehyde‐ketone) resin coatings with two concentrations (50 and 100 wt%) were fabricated through a facile solution impregnation route. A set of characterization techniques, including scanning electron microscopy (SEM), X‐ray photoelectron spectroscopy (XPS), Raman spectroscopy, contact angle testing, atomic force microscopy (AFM), monofilament tensile measurements and microdroplet debonding tests, were carried out to reveal the dependence of surface morphology, chemical constitution, wettability, single‐fiber mechanical response and interfacial shear strength (IFSS) of modified carbon fibers on resin concentration. Nitric acid etching raises the surface O/C atomic ratio from 14.49% to 26.79% and introduces minor surface micro‐pits on fiber surfaces. The AK resin forms continuous coatings via physical encapsulation and plausible intermolecular hydrogen‐bonding interactions with fiber‐surface carboxyl groups. The rising resin concentration modulates surface roughness and water affinity. The 100 wt% AK‐coated carbon fiber achieves the optimal overall performance, with its water contact angle reduced to 82.032° and greatly improved monofilament tensile load. Compared with oxidized OCF with an IFSS of 10.978 MPa, the IFSS values of OCF‐50 wt% AK and OCF‐100 wt% AK reach 13.030 and 13.540 MPa, respectively. This low‐cost, controllable surface modification approach avoids expensive nanofillers and harsh treatment conditions, which offers a reliable scheme for tuning the surface physicochemical characteristics of CF.
No takes yet. Share an insight, caveat, or question.
Yu et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: