Answers are grounded in this paper and cite their sources.
An arrival-residual correction is evaluated in a predictive linear extended-state observer (LESO) for permanent-magnet synchronous motor position control with a known fixed command delay. A stored prediction is matched to its encoder arrival; the residual corrects the aggregate acceleration estimate before the observer and command updates. A projection-sector analysis gives a coupled regional bound and sufficient residual-gain intervals at twelve fixed operating points. The numerical plant includes a finite proportional–integral (PI) current loop and common amplitude and slew limits. Four controller families receive equal finite-candidate calibration budgets, followed by five evaluated configurations and 8802 principal-study and sensitivity trajectories. All configurations satisfy the declared tracking gates in 1548 principal conditions each, including 768 using previously unopened motor-parameter draws. For the arrival-residual reconciled predictive LESO (ARR-LESO), the largest peak and final-window errors are 4.691 and 0.517 mrad. Against the otherwise identical zero-gain configuration, the median paired integrated-absolute-error ratio is 0.782, with an actual-current total-variation ratio of 1.026. An independently calibrated predictive zero-gain controller gives a larger variation trade-off. A separately refined wide-delay setting passes all 8910 earlier conditions; four peak-error exceptions remain among 1024 new motor/noise conditions. An exact residual decomposition and controlled interventions distinguish aggregate correction from source-specific disturbance identification. The regional analysis and finite-condition comparisons characterize the correction channel and its tracking–variation trade-off.
No takes yet. Share an insight, caveat, or question.
Cao et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: