Answers are grounded in this paper and cite their sources.
Coal combustion product (CCP) repositories are a major feature of coal-fired power stations with each one storing millions of tonnes of material often in unlined repositories. One alternative to relocating this material to lined facilities, is the in-situ treatment of the CCPs to produce a geopolymer paste. The present study focuses on the factors governing geopolymer strength development, which represents an initial step towards evaluating this application. The geopolymer produced is constrained by the need to use the mechanical and chemical properties of the CCPs in the repository and curing under ambient conditions. This study investigated the effect of the chemical properties and physical properties on the strength of geopolymer pastes by using materials sourced from five Australian power stations. Unconfined compressive strength (UCS) was used to characterise performance. An artificial neural network (ANN) was constructed to investigate the relative importance of a range of factors influencing performance. The materials tested provided precursor materials with a range of amorphous alumina content from 5.1% to 16.0% by mass, and particle size distributions. Skeletal density measurement combined with SEM imaging showed that the form of the individual particles changes with size. Between 20 µm and 100 µm the presence of hollow cenospheres and plerospheres reduces the material density. The multi-variate non-linear analysis (ANN model) demonstrated that the factors having the greatest impact on strength are the ratio of amorphous alumina and silica from all sources (precursor and activator) to sodium hydroxide, the ratio of amorphous alumina and silica from all sources, and the water holding capacity of the precursor. The experimental program demonstrated that a geopolymer paste could be produced from unprocessed CCPs cured at ambient temperature.
No takes yet. Share an insight, caveat, or question.
Rex et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: