Answers are grounded in this paper and cite their sources.
Earthen materials are often described as unpredictable because their strength depends simultaneously on soil composition, processing, and moisture state. This variability remains one of the main barriers to their extended use in the construction sector. This paper shows that the uniaxial compressive strength of earth pastes can be described using a compact two-step model based on easily accessible material parameters. Controlled rich-clay pastes were prepared across a range of clay activity and packing densities, dried under different moisture conditions, and tested in compression. In the oven-dry state, strength follows a power-law relationship governed by solid volume fraction and methylene blue value,used to expose clay activity variations, with a calibrated packing exponent ๐ = 5 . 7 5 and an RMSE of 0.24 MPa. Under moist conditions, strength loss was described from saturation degree using a characteristic saturation parameter ๐ * ๐ = 0 . 1 3 , leading to an RMSE of approximately 0.31 MPa for the 72 moist conditions. The resulting model describes moist strength as dry-reference strength multiplied by a saturation-driven retention factor. Sensitivity analysis showed that ๐ is more strongly constrained than ๐ * ๐ , which should therefore be interpreted as a characteristic moisture-sensitivity scale rather than a universal threshold. By translating earth variability into a simple framework, this work supports robust mix-design interpretation while highlighting the need for independent validation on additional materials and moisture histories.
No takes yet. Share an insight, caveat, or question.
Ardant et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: