Answers are grounded in this paper and cite their sources.
Structural steels for high-rise and large-scale buildings require adequate strength retention at elevated temperatures for fire resistance and sufficient deformation capacity for seismic resistance. However, simultaneously achieving high strength, fire resistance, seismic performance, ductility, and toughness remains challenging because of inherent trade-offs among these requirements. In this regard, this study investigated the combined effects of B addition and thermomechanical-controlled processing (TMCP) on microstructural evolution and the resulting property balance. Steels without and with 20 ppm B were subjected to conventional hot rolling (HR) and TMCP, followed by microstructural characterization, tensile testing at room and elevated temperatures, and Charpy impact testing. TMCP reduced the bainite fraction from 79.28% to 51.45% in the B-free steel, whereas B addition suppressed this reduction, retaining 67.24% bainite after TMCP. Increasing bainite fraction was associated with higher yield strength and elevated-temperature strength retention but lower elongation and impact toughness. The B-added HR steel exhibited intergranular brittle fracture at 600 °C with an elongation of only 8.10%, accompanied by strong localized B-C grain-boundary segregation, whereas TMCP was associated with reduced segregation and increased elongation to 29.10%. Consequently, the B-added TMCP steel achieved the most favorable overall balance, with a YS ratio (600 °C/RT) of 0.716, a yield ratio of 0.645, and an impact energy of 68.0 J. These results demonstrate that B-assisted bainite retention combined with TMCP provides an effective strategy for balancing fire resistance, seismic performance, ductility, and toughness in high-strength structural steels.
No takes yet. Share an insight, caveat, or question.
Park et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: