Answers are grounded in this paper and cite their sources.
The increasing accumulation of end-of-life rubber waste has intensified the need for sustainable recycling strategies capable of converting discarded elastomers into value-added engineering materials. This study investigated the influence of processing strategy, residence time, nanoclay loading, and recycled ethylene propylene diene monomer (EPDM) content on the morphology, nanostructure, and rheological behavior of polyamide 12 (PA12)-based nanocomposites reinforced with Cloisite30 B (C30 B) nanoclay. The composites were prepared by melt mixing at 200°C and characterized using confocal laser scanning microscopy, transmission electron microscopy (TEM), wide-angle X-ray diffraction (WAXD), and oscillatory rheometry. Three mixing strategies were evaluated: simultaneous melt mixing (M0), PA/clay masterbatch followed by EPDM addition (M1), and PA/EPDM masterbatch followed by clay addition (M2). The results demonstrated that a residence time of 6 min was required to achieve effective EPDM dispersion and extensive clay exfoliation, whereas shorter mixing times resulted in elastomer agglomeration and incomplete structural development. Simultaneous melt mixing (M0) produced the finest EPDM particle morphology together with a predominantly exfoliated clay structure, while the M2 route resulted in partially intercalated clay and poorer elastomer dispersion. Nanoclay contents up to 3 wt% effectively promoted the breakup and uniform distribution of EPDM particles, whereas increasing the clay loading to 5 wt% caused steric hindrance, leading to larger elastomer aggregates despite the formation of a stronger clay network. Rheological analysis revealed that the balance between clay network formation and EPDM relaxation governed the viscoelastic response of the ternary composites. Increasing EPDM content progressively disrupted the clay percolation network, shifting the material behavior from solid-like to elastomer-dominated while maintaining good processability.
No takes yet. Share an insight, caveat, or question.
Archibong et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: