Answers are grounded in this paper and cite their sources.
Natural volcanic ash can modify titanium-alloy oxidation, yet the role of ash chemistry at intermediate temperatures remains poorly resolved. Here, near-α Ti65 alloy is coated with three natural ashes having comparable particle-size ranges but different bulk compositions. Specimens are exposed in air at 650 °C for 24 h, then assessed by mass change, microscopy, EDS, and XRD. Compared with Bare-Ti, the ash-coated specimens show greater observed mean surface-particle coverage (1.77 ± 0.53% for Bare-Ti and 7.53 ± 1.57% to 11.29 ± 2.49% for the coated groups) and higher mean values of apparent oxide-layer thickness estimated by EDS (0.44 ± 0.04 μm for Bare-Ti and 1.29 ± 0.04 to 1.59 ± 0.03 μm for the coated groups). Particle regions on coated specimens are enriched in O, Al, Si, Na, and Ca. Combined EDS and XRD evidence is consistent with TiO2-related signals and tentative albite-like (NaAlSi3O8) and anorthite-like (CaAl2Si2O8) assignments for the surface-particle assemblage. The coated specimens show similar local particle-composition groups but different observed mean responses. VA3 has the highest observed mean whole-specimen net mass change after exposure and cleaning (0.52 ± 0.14 mg cm−2), whereas VA2 has the highest mean particle coverage (11.29 ± 2.49%). These differences may be associated with variations in the relative availability of Si–Al-bearing, silicate-network-modifying, and Fe–Mg–Ti-related constituents. Taken together, these findings suggest that natural volcanic ash is more than a passive deposit during Ti65 oxidation at 650 °C.
No takes yet. Share an insight, caveat, or question.
Zhao et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: