Answers are grounded in this paper and cite their sources.
This study presents the design and architecture-level verification of a heavy-duty transfer chassis for manufacturing intralogistics, formulated as a decision-driven engineering problem rather than a numerical optimization task. The system integrates modular subframes, mechanically synchronized steering, bidirectional towing, and geometrically referenced clamping to address maneuverability, adaptability, and global structural-performance requirements under industrial constraints. Finite element analysis was employed as a decision-support tool to assess global static stress, deformation, and stiffness responses under representative loading scenarios. The static assessment was supplemented by a preliminary parent-material fatigue evaluation based on the Marin methodology and the Goodman criterion. Within the adopted loading, material, contact, and boundary-condition assumptions, the evaluated results supported the selection of the proposed architecture for the defined decision horizon. The final configuration achieved an 18% mass reduction while maintaining the evaluated global stiffness and static-response requirements. Full-scale displacement measurements showed deviations of approximately 3.1%–5.3% from the numerical predictions, supporting the consistency of the predicted global structural response. The study does not constitute complete certification-level verification, as member-level buckling, nonlinear stability, contact-friction sensitivity, and lifecycle fatigue remain outstanding design-release activities. The results nevertheless demonstrate how early architectural commitment and targeted verification can provide a practical and transferable decision-support framework for heavy-duty intralogistics systems developed under constrained industrial conditions.
No takes yet. Share an insight, caveat, or question.
Baykara et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: