Answers are grounded in this paper and cite their sources.
Red clay exhibits unfavorable engineering properties that limit its direct use as subgrade fill material. This study investigated the stabilization of red clay using cement, fly ash, silica fume, and brick powder. Uniaxial compression tests were conducted on single-stabilizer and multi-component mixtures to evaluate their mechanical behavior. Results show that cement provides the highest strength improvement, followed by silica fume, fly ash, and brick powder. Multi-component mixtures with cement as the primary binder, combined with silica fume and fly ash, achieved the highest strengths from 2.0 to 2.4 MPa, representing a 40% increase over single-stabilizer treatments. Three distinct failure modes were identified: ductile fragmentation, X-shaped conjugate shear bands, and single-plane brittle shear. Their evolution is governed by the dominant stabilization mechanism. Range analysis revealed the influence weights of the four stabilizers on strength development as 0.594 for cement, 0.183 for silica fume, 0.135 for fly ash, and 0.088 for brick powder. A predictive model based on a comprehensive strengthening coefficient was proposed and validated against experimental data. The findings demonstrate that the synergistic use of cement and multi-source solid waste provides an effective approach for red clay improvement.
No takes yet. Share an insight, caveat, or question.
Li et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: