Answers are grounded in this paper and cite their sources.
In the present study, zinc oxide nanoparticles (ZnO-NPs) were synthesized by a hydrothermal method followed by the fabrication of polylactic acid/polycaprolactone blend (PLA/PCL, 80/20 wt/wt) at various loadings of ZnO-NPs (2, 4, and 6 wt%) via melt mixing. FTIR and XRD patterns confirmed that the ZnO-NPs were successfully synthesized. The ZnO-NPs with an average diameter of about 46–73 nm were observed by the FESEM analysis. The effect of ZnO-NPs on morphological, thermal, UV absorption, mechanical, photochemical degradation, rheological and cell viability properties of PLA/PCL blend were investigated. FESEM micrographs of bionanocomposites demonstrated that polycaprolactone was dispersed as a droplet to the Polylactic acid matrix phase. DSC analysis showed that the addition of ZnO-NPs increased the degree of crystallinity and melting temperature of the PLA. Mechanical assessment of the bionanocomposites reveals that the addition of 2, 4 and 6 wt.% of ZnO-NPs into the blend sample leads to increase in the tensile modulus by about 5.4, 11 and 24%. The MTT assay results implied that cell viability of the both filled and unfilled samples is greater than 90% indicating their biocompatibility to the fibroblast cells. It is observed that the melt linear viscoelastic properties of the prepared bionanocomposites are under control of LA/PCL chain degradation and hydrodynamic nanoparticles interaction.
No takes yet. Share an insight, caveat, or question.
Babaei et al. (2022) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: