Answers are grounded in this paper and cite their sources.
The gate oxide region affected by injected hot electrons and/or holes along the channel is experimentally determined. The oxide region varies with bias conditions, and the device degradation rate is correlated with the change in the hot-carrier injected region. Based on these results, the following degradation mechanism is proposed: 1) The degradations in transconductance, threshold voltage, and subthreshold slope can be caused mainly by trapped electrons, but not generated interface states. 2) Enhanced degradation due to both hot-electron and hole injections is caused by electrons trapped in neutral centers produced by hot-hole injection.
No takes yet. Share an insight, caveat, or question.
Tsuchiya et al. (1987) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: