Answers are grounded in this paper and cite their sources.
This letter demonstrates a new technology for the heterogeneous integration of GaN and Si devices, which is scalable at least up to 4-in wafers and compatible with conventional Si fabrication. The key step in the proposed technology is the fabrication of a Si (100)-GaN-Si hybrid wafer by bonding a silicon (100) on insulator (SOI) wafer to the nitride surface of an AlGaN/GaN on Si (111) wafer. A thin layer of silicon oxide is used to enhance the bonding between the SOI and the AlGaN/GaN wafers. Using this technology, Si pMOSFETs and GaN high-electron-mobility transistors have been fabricated on a 4-in hybrid wafer. Due to the high-temperature stability of GaN as well as the high-quality semiconductor material resulting from the transfer method, these devices exhibit excellent performance. A hybrid power amplifier has been fabricated as a circuit demonstrator, which shows the potential to integrate GaN and Si devices on the same chip to enable new performance in high-efficiency power amplifiers, mixed signal circuits, and digital electronics.
No takes yet. Share an insight, caveat, or question.
Lee et al. (2011) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: