Answers are grounded in this paper and cite their sources.
Experimental investigation shows improved surface finish in steel machining, suggesting enhanced polishing techniques.
This research presents an enhanced polishing technique called “lateral ultrasonic vibration assistant abrasive flow machining (LUVA-AFM),” an advancement of the AFM method. The process involves a slurry fluid that carries abrasive particles parallel to the workpiece surface, while the tool’s ultrasonic vibrations move laterally. The study experimentally examines the impact of silicon carbide (SiC) abrasive particles on the workpiece surface, utilizing a design of experiment algorithm and ANOVA analysis to assess the influence of various process parameters on surface roughness. Optimal conditions for achieving a superior surface finish were identified as a tool vibration frequency of 31 kHz, abrasive fluid flow rate of 1.5 L/min, polishing time of 30 minutes, and workpiece hardness of 60 HRC. Conversely, minimal settings such as a vibration amplitude of 30 µm and a distance of 300 µm between the tool and workpiece yielded the best surface quality. Key factors affecting roughness reduction included flow rate, polishing duration, and ultrasonic vibration frequency.
No takes yet. Share an insight, caveat, or question.
Rahimi et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: