Answers are grounded in this paper and cite their sources.
Modification of conventional zinc titanate (ZT) sorbents to increase their reactivity and stability during multiple cycles of sulfidation/regeneration at high and middle temperatures was pursued by addition of Co 3 O 4 . Moreover, evaluation of the modified zinc titanates (ZTC) was conducted using several instruments such as an X-ray diffractometer, Fourier transform infrared spectrometer, scanning electron microscope, and so on. The ZTC sorbents prepared by the physical mixing of the ZT sorbent with 25 wt % of Co 3 O 4 showed an excellent sulfur-removing capacity and no deactivation even after multiple cycles of sulfidation/regeneration in both high- and middle-temperature conditions. The cobalt permeated the Zn 2 TiO 4 lattice, leading to a new spinel phase, ZnCoTiO 4 . It worked not only as an active site during the sulfidation process but also as a support to prevent zinc migration to the outside of the sorbents and to minimize volume expansion/contraction. Under middle-temperature conditions, the phase separation of the ZTC sorbent including a cobalt oxide intermediate in addition to the ZnCoTiO 4 spinel structure was observed. Also, the cobalt additive increased the regeneration capacity of Zn-based sorbents because it played an important role as the catalyst for oxidation.
No takes yet. Share an insight, caveat, or question.
Jun et al. (2001) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: