Answers are grounded in this paper and cite their sources.
Explores drilling performance with ultrasonic techniques in Nimonic 80A, suggesting enhancements in sustainability.
One of the most popular machining techniques for creating precise holes in engineering materials with good surface quality and dimensional accuracy is drilling. However, there are a number of issues that come up when machining hard-to-cut materials, such as extreme heat generation, high energy consumption, and widespread usage of conventional cutting fluids, which could be harmful to the environment and human health. As a result, increasing the drilling process’ sustainability has emerged as a key area of study. In order to improve machining performance, ultrasonic-assisted drilling using a diamond-textured drill was used in this investigation. Mahua oil was used as an eco-friendly cutting fluid in the minimal quantity lubrication process. Response surface methodology was used in the design and execution of the experiments. Additionally, the relevance of important process variables, such as spindle speed, feed rate, vibration intensity, air pressure, and standoff distance, was evaluated using analysis of variance. Analysis of variance indicated that feed rate and rotational speed were the most influential parameters affecting thrust force and surface roughness, followed by standoff distance, air pressure, and vibration power intensity. The optimized conditions (850 r/min, 0.03 mm/rev, 5 bar air pressure, 20 mm standoff distance, and 75% vibration power intensity) significantly reduced both thrust force and surface roughness. The study yielded the ideal parameter settings, which were then verified by confirmation tests. The thrust force and surface roughness errors between the measured and anticipated values were within an acceptable range, at 8.78% and 6.66%, respectively.
No takes yet. Share an insight, caveat, or question.
Rajput et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: