Key result
Multimodal guided wave inversion estimates shear modulus within ~4% error in under 20 seconds.
Why the study?
Arterial stiffness is an important cardiovascular biomarker, and this study aimed to develop and validate a new guided wave inversion approach for shear wave elastography to estimate local arterial stiffness.
A new multimodal guided wave inversion approach for shear wave elastography accurately and rapidly estimates arterial stiffness and wall thickness in phantom models.
Answers are grounded in this paper and cite their sources.
Phantom accuracy encourages preclinical development; leaves open in vivo translation for arterial stiffness assessment.
Arterial stiffness is an important biomarker for many cardiovascular diseases. Shear wave elastography is a recent technique aimed at estimating local arterial stiffness using guided wave inversion (GWI), i.e. matching the computed and measured wave dispersion. This paper develops and validates a new GWI approach by synthesizing various recent observations and algorithms: (a) refinements to signal processing to obtain more accurate experimental dispersion curves; (b) an efficient forward model to compute theoretical dispersion curves for immersed, incompressible cylindrical waveguides; (c) an optimization framework based on the recent observation that the measured dispersion curve is multimodal, i.e. it matches for not one but two different wave modes in two different frequency ranges. The resulting inversion approach is validated using extensive experimental data from rubber tube phantoms, not only for modulus estimation but also to simultaneously estimate modulus and wall thickness. The observations indicate that the modulus estimates are best performed with the information on wall thickness. The approach, which takes less than half a minute to run, is shown to be accurate, with the modulus estimated with less than 4% error for 70% of the experiments.
No takes yet. Share an insight, caveat, or question.
Roy et al. (2021) studied Arterial stiffness (n=10). Multimodal guided wave inversion vs. Known material properties (Rheospectris measurements) / Single-mode inversion was evaluated on Error in modulus estimation. The multimodal guided wave inversion approach accurately estimated shear modulus with less than 4% error in 70% of the phantom experiments and required less than 20 seconds to run.
Synapse has enriched 10 related papers. Consider them for comparative context: