Answers are grounded in this paper and cite their sources.
Regenerated cellulose (RC) films having various viscosity-average molecular weights ( M η ) ranging from 2.2 × 10 4 to 8.2 × 10 4 g/mol were prepared from cotton linters in 6 wt % NaOH/4 wt % urea aqueous solution by coagulation with 2 M acetic acid and 2% H 2 SO 4 aqueous solution. The dissolution of cellulose and the structure, transparency, and mechanical properties of the RC films were investigated by 13 C NMR, ultraviolet, and infrared spectroscopies; scanning electron microscopy; X-ray diffraction; and a strength test. The RC films exhibited the cellulose II crystalline form and a homogeneous structure with 85% light transmittance at 800 nm. 13 C NMR spectroscopy indicated that the presence of urea in NaOH aqueous solution significantly enhanced the intermolecular hydrogen bonding between cellulose and the solvent, resulting in a higher solubility of cellulose and the complete transition of its crystalline form from I to II. The tensile strength (σ b ) of the RC films in the dry state increased with increasing M η up to 6.0 × 10 4 g/mol and then hardly changed. The values of σ b and the breaking elongation (ε b ) of the RC film having M η = 6.0 × 10 4 g/mol by coagulation with 2% H 2 SO 4 were found to be 106 MPa and 8.0%, respectively, in the dry state and 17.0 MPa and 10.7%, respectively, in the wet state, and the strength was much higher than that of commercially available cellophane. Therefore, a novel and nonpolluting process for the manufacture of cellulose film and fiber from cotton linters in 6 wt % NaOH/4 wt % urea aqueous solution is provided in this work.
No takes yet. Share an insight, caveat, or question.
Zhang et al. (2001) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: