Diffusion barrier materials, TiN and WN, were deposited by atomic layer deposition (ALD). The chlorine concentration of the TiN film was as low as 1.2 at.-%, and resistivity was below 200 μΩ cm. Ultra high aspect ratio (AR = 85) trenches were used to assess step coverage. Tungsten nitride film, deposited from WF6 and ammonia, was found to have high resistivity, although the residue content was low. The barrier deposition compatibility was studied using the copper surface exposed on the bottom of vias in the copper dual-damascene structure. The deposition on copper of both TiN and WN was found to be very challenging.
No takes yet. Share an insight, caveat, or question.
Elers et al. (2002) studied this question.