Answers are grounded in this paper and cite their sources.
Constant-voltage-bias (VDS= VGS= 30 V) stress measurements are performed for a period of 105s on thin-film transistors (TFTs) with amorphous indium-gallium-zinc-oxide (IGZO) channel layers fabricated via RF sputtering using a postdeposition annealing temperature of 200degC, 250degC, or 300degC. Thermal silicon dioxide is employed as a TFT bottom-gate insulator. All SiO2/IGZO TFTs tested exhibit the following: 1) a positive rigid log(ID)- VGStransfer curve shift; 2) a continuous drain-current decrease over the entire stress duration; and 3) recovery of the log(ID)-VGStransfer curve toward the prestressed state when the stressed TFT is left unbiased in the dark at room temperature for an extended period of time. The SiO2/IGZO TFTs subjected to a higher postdeposition annealing temperature are more stable. A small (and typically negligible) amount of clockwise hysteresis is present in the log(ID) -VGStransfer curves of IGZO TFTs. These instability and hysteresis observations are consistent with a SiO2/ IGZO TFT instability mechanism involving electron trapping within the IGZO channel layer.
No takes yet. Share an insight, caveat, or question.
Hoshino et al. (2009) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: