Answers are grounded in this paper and cite their sources.
A study of the operation of surface- and buried-mode p-channel FET's is conducted. The buried-channel devices are fabricated using n-type polysilicon gates while the surface-channel devices employ p-type polysilicon gates. Using devices with different channel lengths (20 to 0.4 µm), threshold voltage lowering, subthreshold characteristics, transconductance, punchthrough, and body effects are compared over a wide range of background doping concentrations. In the study surface-channel devices were found to be more resistant to short-channel effects than their buried-channel counterparts independent of background doping concentration. Two-dimensional computer simulation revealed that buried-channel devices are more subject to drain-induced barrier lowering and bulk punchthrough. The body effect for the surface-channel device is lower than its counterpart at low background doping concentrations whereas the buried-channel device has a lower body effect at high background doping levels. The effective carrier mobility of buried-channel devices was found greater than that of surface devices. The net difference in the transconductance, however, is offset by the high parasitic diffusion resistance.
No takes yet. Share an insight, caveat, or question.
Hu et al. (1985) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: