Answers are grounded in this paper and cite their sources.
A reliable and scalable transfer of 2D-TMDCs (two-dimensional transition metal dichalcogenides) from the growth substrate to a target substrate with a high reproducibility and yield is a crucial step for device integration. In this work, we introduced a scalable dry-transfer approach for 2D-TMDCs grown by MOCVD (metal–organic chemical vapor deposition) on sapphire. Transfer to a silicon/silicon dioxide (Si/SiO 2 ) substrate is performed using PMMA (poly(methyl methacrylate)) and TRT (thermal release tape) as sacrificial layer and carrier, respectively. Our proposed method ensures a reproducible peel-off from the growth substrate and better preservation of the 2D-TMDC during PMMA removal in solvent without compromising its adhesion to the target substrate. This is achieved through a PMMA plasma treatment, which mitigates stress release during solvent exposure, and target substrate prewetting enhancing the interfacial adhesion between the 2D material and the target substrate. A comprehensive comparison between the dry method introduced in this work and a standard wet transfer based on potassium hydroxide (KOH) solution shows improvement in terms of cleanliness and structural integrity for the dry-transferred layer, as evidenced by X-ray photoemission and Raman spectroscopy, respectively. Moreover, fabricated field-effect transistors (FETs) demonstrate improvements in subthreshold slope, maximum drain current, and device-to-device variability. The dry-transfer method developed in this work enables large-area integration of 2D-TMDC layers into (opto)electronic components with high reproducibility while better preserving the as-grown properties of the layers.
No takes yet. Share an insight, caveat, or question.
Ghiami et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: