Answers are grounded in this paper and cite their sources.
According to our scaling study, a deeper n-well allows for a lower n-well surface concentration with improved short-channel effects in submicrometer-channel PMOS-FET's. The deep n-well, however, requires a large space between n- and p-channel devices. This large space limits the integration density in scaled bulk CMOS VLSI's. The deep-trench isolation combined with an epitaxial layer resolves this drawback with significantly improved device-to-device isolation and latchup susceptibility. The 6-µm-deep with 2-µm-wide deep trench is etched in the epitaxial layer and is refilled with 1500 Å of thermal silicon-dioxide film and 2 µm of polysilicon film. The sheet resistances of N+and P+diffusion and N+-doped polysilicon layers were reduced to 3 to 4 Ω/□ by using the self-aligned TiSi2layer with an oxide sidewall spacer. As a result of this low sheet resistance, the saturation drain current of submicrometer n- and p-channel MOSFET's was improved approximately 33 to 37 percent compared with conventional MOSFET's without the self-aligned TiSi2layer. The 0.5-µm-channel CMOS devices using the deep-trench isolation with an epitaxial layer and the self-aligned TiSi2layer operated at a propagation delay time of 140 ps with a power dissipation of 1.1 mW per inverter and attained a maximum clock frequency of 400 MHz in a static / 4 counter without suffering from latchup even at the latchup trigger current of 200 mA.
No takes yet. Share an insight, caveat, or question.
Yamaguchi et al. (1985) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: