This is the authors' abstract. We don't add key points for this paper.
In this research, screen-printed graphene electrodes (SPGEs) were fabricated on a single-plate electrowetting-on-dielectric (EWOD) digital microfluidic chip. The chip contained T-junction EWOD structures for merging buffer reagent and analyzed droplets and the electrochemical sensor based on SPGEs at the end of T-junction. The EWOD structures consisted of silver EWOD electrodes, a polydimethylsiloxane dielectric layer, and Teflon1AF hydrophobic layers. The electrochemical sensor comprised a working SPGE, a counter SPGE, and a screen-printed silver/silver chloride reference electrode. Both EWOD and electrochemical electrodes were fabricated by a screen-printing technique. The digital microfluidic chip with the SPGE sensor was applied to mix and analyze three biochemical reagents, including potassium hexacyanoferrate (K_4Fe(CN)_6), nicotinamide adenine dinucleotide (NADH), and hydrogen peroxide (H_2O_2). The electrochemical measurements were conducted using cyclic voltammetry over the concentration ranges of10-500\,\,μ M,10-500\,\,μ M, and1000-7500\,\,μ MforK_4Fe(CN)6, NADH, andH_2O_2, respectively. The results showed that the detection performances, including sensitivity and detection limit of SPGE sensor on the EWOD chip, were considerably better than those of screen-printed carbon paste electrodes (SCPEs).
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Ugsornrat et al. (2023) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: