Why the study?
Does preload augmentation with whole blood infusion improve ventricular output and ejection fraction in patients immediately after myocardial revascularization?
Does preload augmentation with whole blood infusion improve ventricular output and ejection fraction in patients immediately after myocardial revascularization?
In patients immediately post-myocardial revascularization, increasing preload beyond a PCW of 7 mm Hg fails to augment stroke volume and progressively decreases ejection fraction, highlighting limitations of the Frank-Starling mechanism.
Answers are grounded in this paper and cite their sources.
Preload beyond PCW 7 mm Hg was associated with no stroke volume gain and falling EF post-revascularization; hypothesis-generating for optimal filling pressures.
The effects of preload augmentation on left ventricular output (Frank-Starling mechanism), ejection fraction, and the relationship between pulmonary wedge pressure and end-diastolic volume were studied in 15 patients immediately after myocardial revascularization.The patients were studied under morphine sulfate anesthesia with the chest temporarily closed.Sequential measurements of radionuclide ejec- tion fraction, thermodilution cardiac output, and systemic and pulmonary arterial pressures were made before and after infusion of 500, 1000, 1250 and 1500 ml of whole blood.Cardiac performance was assessed by means of (1) ventricular function curves (stroke volume and stroke work vs end-diastolic volume); (2) sequential changes in ejection fraction and end-systolic volume; (3) the relationship between pulmonary capillary wedge pressure (PCW) and end-diastolic volume; and (4) changes in estimated wall tension.Volume transfusion increased the left ventricular end-diastolic volume index (EDVI) from an average con- trol value of 41 ml/m2 to 88 ml/m2 (after infusion of 1500 ml of whole blood), and increased PCW from 2 mm Hg to 8 mm Hg.Although cardiac index increased (2.1 to 3.6 1/min/m2) and left ventricular stroke work index increased (20 to 38 g-m/m2), the largest increases occurred when EDVI was less than 70 ml/m2 and PCW less than 7 mm Hg.Above these values the ventricular function curves were relatively flat.In contrast, ventricular ejection progressively decreased with increasing preload.Ejection fraction decreased from 0.70 to 0.49 and end-systolic volume index increased from 13 mi/m2 to 45 m]/m2, despite a decreasing systemic vascular resistance.Thus, in these patients: (1) the Frank-Starling mechanism plays little role in augmentation of stroke volume above a PCW of 7 mm Hg or an EDVI of 70 ml/m2; (2) increases in ventricular output achieved by increasing preload were accompanied by decreases in ventricular ejection fraction; and (3) the filling pressure (volume) associated with maximal ejection fraction was significantly lower than that associated with maximal ventric- ular output.STARLING'S LAW of the heart and the associated Frank-Starling mechanism characterize cardiac per- formance in terms of ventricular function curves.`3These curves express the functional consequences of alterations in preload, and serve as the rationale for improvement of cardiac output by volume administra- tion.Studies in animals and man have attempted to define the relationship between ventricular output (stroke work, stroke volume) and filling pressure (end- diastolic, pulmonary wedge, central venous) in normal and disease states.3'-"In patients with significant ven- tricular dysfunction, the maximal ventricular output is lower than in normal patients and is achieved at higher filling pressures, in some cases 18 mm Hg or more.4"b'" These results have served as guidelines for volume transfusion therapy in patients with depressed ven- tricular function.4' 1 Maximal ventricular work or volume output could be achieved by progressive volume infusion until the "optimal" filling pressure is obtained.
No takes yet. Share an insight, caveat, or question.
Mangano et al. (1980) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: