Answers are grounded in this paper and cite their sources.
The distributions of H atoms, displaced Si atoms, and vacancy-type defects in Si(100) produced by the implantation, at room temperature, of 1×{}10¹⁶ 35-, 60-, and 100-keV H⁺-ions/cm² were measured with use of ion and slow-positron beam techniques. Three different regions of damage were observed. The damage distribution did not correlate with the deposited energy distribution. A vacancy-type damage region surviving room-temperature annealing and the dynamic annealing during implantation is produced in the region where the energy of the primary Si recoils exceeds a threshold value of 2.0±{}0.5 keV, i.e., an energy spike is needed for damage formation. In the region of the deposited energy peak, H is associated with damage consisting of SiH centers and vacancy complexes. At the end region of the implantation range, the distribution of displaced Si atoms is produced by H impurities in crystalline Si. Two different recovery stages were observed. The first stage, at 500 K, is associated with the damage region containing vacancy-type defects and SiH centers with vacancy complexes; the recovery energy is 1.7 eV. The second stage, at 700 K, is attributed to the end region of the H range, where the recovery energy associated with the recrystallization of Si after the H loss is 2.1 eV.
No takes yet. Share an insight, caveat, or question.
Keinonen et al. (1988) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: