Answers are grounded in this paper and cite their sources.
Purpose – In this work, the production of ceramic moulds for aluminium casting using a stereolithographic apparatus (SLA) is presented. Design/methodology/approach – Suspensions of silica powders in a photoreactive resin were used in a standard SLA equipment in order to build green parts. SLA, SLA‐250 (3D System, Valencia, CA) was modified in order to fabricate a ceramic green parts. Findings – A characterization of mechanical properties of the material samples was performed. Finally, moulds for aluminium casting were obtained either using the stereolithographic part as a green mould, either by pyrolisis of the organic binder and subsequent sintering at high temperature. Research limitations/implications – Future investigations will be devoted to optimise the process and the mechanical performances of the sintered parts, improving the rheological properties of suspensions and reducing the building time. Originality/value – This is a novel work on the production of ceramic moulds for aluminium casting using a SLA.
No takes yet. Share an insight, caveat, or question.
Corcione et al. (2006) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: