Answers are grounded in this paper and cite their sources.
In this study, the influence of the Ti and TiN top electrodes on the switching behaviors of the Al 2 O 3 /Pt resistive random access memory devices with various compliance currents (CCs, 1–15 mA) has been compared. Based on the similar statistical results of the resistive switching (RS) parameters such as V set / V reset , R HRS / R LRS (measured at 0.10 V) and resistance ratio with various CCs for both devices, the Ti/Al 2 O 3 /Pt device differs from the TiN/Al 2 O 3 /Pt device mainly in the forming process rather than in the following switching cycles. Apart from the initial isolated state, the Ti/Al 2 O 3 /Pt device has the initial intermediate state as well. In addition, its forming voltage is relatively lower. The conduction mechanisms of the ON and OFF state for both devices are demonstrated as ohmic conduction and Frenkel–Poole emission, respectively. Therefore, with the combined modulations of the CCs and the stop voltages, the TiN/Al 2 O 3 /Pt device is more stable for nonvolatile memory applications to further improve the RS performance.
No takes yet. Share an insight, caveat, or question.
Qi et al. (2018) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: