Answers are grounded in this paper and cite their sources.
Fracture and microtome sections of polyblends, prepared from varying proportions of poly(vinyl chloride) and an elastomer (with and without talc fillers) and with the use of different conditions of mixing, were examined with the electron microscope. In general, the structures observed in cut and in fracture sections were very similar when taken from the same polymer at the same reference planes with respect to direction of process‐induced orientation. Optimal tensile behavior seems to occur when the degree of mixing establishes a structure resembling a fibrous interweaving of continuous domains. Undermixing or overmixing seems to establish more random dispersions of more or less large and discrete particles of rubber in a continuous poly(vinyl chloride) phase. Introduction of fillers changes the microstructure of the fracture patterns. Particularly in polymers containing talc fillers, the influence of prior strain history on microstructure is very evident. Thirty‐eight figures are shown to demonstrate how differences in composition, mixing process, and strain history can alter the microstructure produced by fracture or cutting of the plastic.
No takes yet. Share an insight, caveat, or question.
Rovatti et al. (1963) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: