Answers are grounded in this paper and cite their sources.
A new liftoff technology, in which a metallization layer can be deposited at high temperatures, is developed to provide two-level highly packed interconnection metallization. A heat-resistant polymide, PIQ®, is employed as the liftoff layer. The reverse pattern of the metallization is formed by reactive sputter etching of the PIQ layer around a thin Mo mask. After metallization layer deposition, lift-off is carried out by electrolytic etching of the Mo mask, thus removing the layer deposited on PIQ. A higher packing density of interlevel connection is also accomplished by adopting exposed via holes. Utilizing this technology, fine-featured smoothly tapered metallization patterns can be obtained almost irrespective of the underlying topology. The minimum pitches of the first level, second level, and via holes are 5, 7, and 7 µm, respectively. This technology does not appear to be detrimental to bipolar device characteristics. A 4096-bit high-speed bipolar memory LSI with two-level highly packed interconnection metallization was produced experimentally utilizing this liftoff technology.
No takes yet. Share an insight, caveat, or question.
Homma et al. (1981) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: