Answers are grounded in this paper and cite their sources.
Polyester Polyols from Glycolyzed PET Waste: Efect of Glycol Type on Kinetics of Polyesterification*hydroxyl to carboxyl ratio, to obtain the polyester polyols.The kinetics of polyesterification of the three glycolyzed PET products with adipic acid under conditions comparable to commercial scale processing is reported.Conventionally the kinetic investigations are carried out under isothermal reaction conditions.However, in a commercial process, the reactants are generally heated gradually from room temperature t o a cook temperature lower than the boiling point of the glycol.Then, at this temperature, the reaction is carried out to hook the glycol moieties for minimizing glycol loss.The temperature is subsequently raised to a higher value to accelerate the rate of the reaction.A similar heating cycle was employed in the present work and the kinetics was studied for the two isothermal plateaus in the heating cycle. EXPERIMENTAL Materials.Fiber grade P E T waste, with number average molecular weight ranging between 18,000 and 20,000, was obtained from M/s Century Enka, Pune (India).Ethylene glycol (LR) was obtained from M/s SD Fine Chem.Pvt. Ltd., Boisar (India).Propylene glycol (LR) was supplied by M/s IDPL, Hyderabad (India).Diethylene glycol (LR) was obtained from M/s Sarabhai Chemicals, Bombay (India).Adipic acid (LR) was procured from M/s High Purity Chemicals, Delhi (India).Zinc acetate (LR) was procured from M/s Glaxo, Bombay (India).Paratoluene-sulfonic acid was supplied by M/s Sisco Laboratories, Bombay (India).Glycolysis of PET Waste.The PET waste was depolymerized to get low molecular weight diols by refluxing it with 62.5% w/w, ethylene glycol (EG), propylene glycol (PG), and diethylene glycol (DEG).The depolymerization reaction was carried out in the presence of 0.5% w/w zinc acetate, based on the weight of PET, at the reflux temperature of the glycol for 8 h.Thus three oligomeric diols coded GPET-6, GPET-3, and GPET-9 were prepared by depolymerizing PET waste with ethylene glycol, propylene glycol, and diethylene glycol, respectively.The glycolyzed
No takes yet. Share an insight, caveat, or question.
Vaidya et al. (1989) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: