Answers are grounded in this paper and cite their sources.
Sloshing in partially filled tanks induces dynamic loads on tank walls and structures inside the tank. Internal structures influence the flow and may lead to ventilation effects that generate a gas-liquid mixture. Entrapped and dissolved gas alters the properties of the liquid phase, which typically reduces impact loads. In the present study, non-invasive tomographic reconstruction techniques were applied to optically capture entrapped air in a sloshing model-scale tank. The simultaneous multiplicative algebraic reconstruction technique (SMART) and the multiplicative line-of-sight (MLOS) technique were used to quantify entrapped air. Results showed that the accuracy of the calculated air volumes depends significantly on the image pre-processing as well as on the selected reconstruction settings. A predefined test case was used to adjust the processing and to validate the reconstruction results. Induced single bubbles were captured while the tank oscillated, exciting the fluid in resonance. Associated trajectories of the rising bubbles were captured, compared, and analyzed. The applied tomographic techniques were capable to reconstruct the required volume of interest for single bubbles and bubble clouds. Tank motions did not limit measurement capabilities as the camera setup moved along with tank motions. • Experimental investigation of ventilation effects. • Suitability study of tomographic reconstruction methods for sloshing model-tests. • Optical measurement of gas entrapments without disturbing the flow. • Tomographic reconstruction of bubble systems with different complexity. • Quantification of fluid properties of the bubbly mixture.
No takes yet. Share an insight, caveat, or question.
Tödter et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: