Answers are grounded in this paper and cite their sources.
A series of rigid interpenetrating polymer network (IPN) foams, based on a rosin-based polyurethane and an epoxy resin, were prepared by a simultaneous polymerization technique. The changes in the chemical structure, dynamic mechanical properties, and morphology of the rigid IPN foams were investigated by Fourier transform infrared (FTIR) spectroscopy, dynamic mechanical thermal analysis, and scanning electron microscopy. The FTIR analysis showed clearly that the cure rate of the rosin-based rigid polyurethane foam and the epoxy resin were different and, as a result, these two networks formed sequentially in the final rigid IPN foams. All of the rigid IPN foams exhibited a single, broad glass transition that shifted to lower temperature as the epoxy resin content increased. The experimental composition dependence of Tg's of the rigid IPN foams showed slight positive deviation from the Fox equation for homogeneous polymer systems. No phase separation was observed from the scanning electron microscopy investigation. It could be concluded that these two component networks were compatible in the final rigid IPN foams. This compatibility could be attributed to a graft structure in the polyurethane and the epoxy resin networks arising from the reaction of the hydroxyl groups of the epoxy resin with the isocyanate groups of MDI, and from the reaction of the hydroxyl groups of the polyols with the epoxide groups of the epoxy resin, as suggested by FTIR analysis.
No takes yet. Share an insight, caveat, or question.
Zhang et al. (1998) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: