Answers are grounded in this paper and cite their sources.
In this work we investigate the characteristics and critical operating temperatures of on-membrane embedded MOSFETs from an experimental and analytical point of view. This study permits us to conclude the possibility of integrating electronic circuitry in the close vicinity of micro-heaters and hot operation transducers. A series of calibrations and measurements has been performed to examine the behaviors of transistors, inverters and diodes, actuated at high temperature, on a membrane equipped with an on-chip integrated micro-heater. The studied n- and p-channel body-tied partially-depleted MOSFETs and CMOS inverter are embedded in a 5 μ m-thick membrane fabricated by back-side MEMS micromachining using SOI technology. It has been noted that a pre-stabilization step after the harsh post-CMOS processing, through an in situ high-temperature annealing using the micro-heater, is mandatory in order to stabilize the MOSFETs characteristics. The electrical characteristics and performance of the on-membrane MOS components are discussed when heated up to 335 °C. This study supports the possibility of extending the potential of the micro-hotplate concept, under certain conditions, by embedding more electronic functionalities on the interface of on-membrane-based sensors leading to better sensing and actuation performances and a total area reduction, particularly for environmental or industrial applications.
No takes yet. Share an insight, caveat, or question.
Amor et al. (2016) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: