Answers are grounded in this paper and cite their sources.
Sputter-deposited LaNiO3 (LNO) was used as a bottom electrode for the deposition of 50-nm-thick Ba(Zr0.12Ti0.88)O3 (BZT) thin films on Pt/Ti/SiO2/Si substrates by rf magnetron sputtering. Highly intense and (100)-oriented perovskite films of BZT were grown on a (100)-textured LaNiO3 electrode by rf magnetron sputtering at temperatures varying from 300 to 550°C in an atmosphere of Ar/O2=50/50, or in Ar/O2 atmosphere varying from 50/50 to 90/10 at 400°C. The BZT films had a very smooth surface and an interface coherently bonded to the LNO electrode. X-ray diffraction (XRD) revealed that the crystallinity and lattice constant of the BZT films changed with deposition condition. With improvement in film crystallinity, the dielectric constant of the BZT films increased. A value of k=210–250 was obtained for films deposited at 400–450°C in the Ar/O2=50/50 atmosphere, and more importantly, a highly insulative characteristic of low leakage current of ∼10-9 A/cm2 with a high onset field of ∼1 MV/cm was achieved for the BZT capacitors. The leakage current was also significantly affected by preparation conditions of the top and bottom electrodes of the BZT capacitors.
No takes yet. Share an insight, caveat, or question.
Shy et al. (1998) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: