Answers are grounded in this paper and cite their sources.
Both pure and mixed CeO 2 –Fe 2 O 3 were prepared for CO 2 reduction to CO by chemical looping. The crystallographic structure of the investigated materials was monitored in situ during H 2 reduction and CO 2 oxidation. A solid solution of iron in ceria was identified. Up to 70 wt % CeO 2, a distinct Fe 2 O 3 hematite phase occurred next to the solid solution. At higher CeO 2 content, no diffraction patterns corresponding to iron oxide phases were present, but upon H 2 temperature programmed reduction, a metal iron phase appeared. The Fe 2 O 3 phase at lower CeO 2 content, during H 2 temperature programmed reduction, completely reduced at 700 °C while the solid solution was only partially reduced. For all investigated samples, CO 2 reoxidized iron in one-step to Fe 3 O 4 from 500 °C during temperature programmed oxidation. Adding CeO 2 to Fe 2 O 3 was beneficial for the materials activity and stability. Isothermal redox cycles were performed without significant loss of CO 2 conversion. The highest CO yield was obtained for 20 wt % CeO 2 –Fe 2 O 3, but 50 and 70 wt % CeO 2 –Fe 2 O 3 were the most stable combinations.
No takes yet. Share an insight, caveat, or question.
Galvita et al. (2013) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: