Answers are grounded in this paper and cite their sources.
For attachment to human skin of a MEMS tactile display device having arrayed actuators for mechanical stimulations, a Si substrate with arrayed through-silicon-via(TSV)electrodes and diode elements was fabricated for individual connection to each actuator without reverse current flow. After p-n junctions for the diode array were formed in a device layer of a silicon on insulator(SOI)wafer, deep holes(φ150 μm)for the TSV and 300-μm-deep large cavity were etched using a double-layered mask pattern from the substrate layer with deep reactive ion etching. After complete through etching from the device layer, sputtering and patterning of the Au/Cr seed film, Ni electroless plating was conducted to form the TSV electrode uniformly on the through-hole sidewall. A Pt/Ti/AlSi stacked thin electrode film was used to contact both the p-type and n-type Si surfaces of the diode. Instead of a long sintering process at 400 ℃ that causes shrinking and peeling of the Ni electroless-plated film, ohmic contact with low resistance was achieved between the Pt/Ti/AlSi electrode and the Si surface by rapid thermal annealing at 400 ℃ for 1 min or longer. The fabricated diode has low forward resistance and sufficiently high backward breakdown voltage greater than 35 V.
No takes yet. Share an insight, caveat, or question.
Mineta et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: