Answers are grounded in this paper and cite their sources.
A reflow profile is proposed which is engineered to optimize soldering performance based on defect mechanism analysis. In general, a slow ramp‐up rate is desired in order to minimize hot slump, bridging, tombstoning, skewing, wicking, opens, solder beading, solder balling, and components cracking. A minimized soaking zone reduces voiding, poor wetting, solder balling, and opens. Use of a low peak temperature lessens charring, delamination, intermetallics, leaching, dewetting, and voiding. A rapid cooling rate helps to reduce grain size as well as intermetallic growth, charring, leaching and dewetting. However, a slow cooling rate reduces solder or pad detachment. The optimized profile favors that the temperature ramps up slowly until reaching about 180°C. Implementation of the optimized profile requires the support of a heating‐efficient reflow technology with a controllable heating rate. Emergence of the forced air convection reflow provides a controllable heating rate. In addition, it is not sensitive to variation in parts’ features, thus allows the realization of the optimized profile.
No takes yet. Share an insight, caveat, or question.
Ning‐Cheng Lee (1999) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: