Answers are grounded in this paper and cite their sources.
Background: Composites resin is the sort after restorative material for esthetics. A variety of changes are made to improve the mechanical properties and esthetic durability of composite resin restoration. To compare the flexural strength and color stability of Omnichroma composite when incorporated with titanium dioxide nanoparticles (TiO 2 -NPs) and chitosan NPs (Ch-NPs). Materials and Methods: Thirty-six samples of rod-shaped omnichroma blocks were prepared for testing flexural strength using a three-point bending test, while disc-shaped blocks were used for testing color stability using an spectrophotometer. The samples were categorized into three groups ( n = 12) as Group 1%–1% TiO 2 -NPs incorporated omnichroma, Group 2%–1% Ch-NPs incorporated omnichroma, and Group 3-Omnichroma (control). They were further subdivided into Groups 1a, 1b, 2a, 2b, 3a, and 3b where groups 1a, 2a, and 3a ( n = 6 each) were tested for flexural strength and groups 1b, 2b, and 3b ( n = 6 each) were tested for color stability. Test blocks were kept in distilled water for 24 hrs. Data were performed using the one-way ANOVA and Tukey’s post hoc test. Results: Omnichroma showed highest flexural strength (113.95 ± 11.01Mpa) followed by TiO 2 -NPs (31.02 ± 5.27 Mpa) and Ch-NPs (28.82 ± 3.70 Mpa) incorporated Omnichroma respectively. Highest color change was exhibited with TiO 2 -NPs addition than Ch-NPs in omnichroma. Conclusions: The flexural strength of Omnichroma has decreased with the addition of 1% TiO 2 and 1% Ch-NPs. A clinically acceptable color shift on omnichroma is demonstrated by addition of 1% Ch-NPs.
No takes yet. Share an insight, caveat, or question.
Gayathri et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: