Answers are grounded in this paper and cite their sources.
Local lifetime reduction by proton irradiation was used to optimize the static and dynamic parameters of a 10 kV SiC p-i-n diode. Carrier lifetime was reduced locally at the anode side by irradiation with 800 keV protons at fluences up to 1 × 1011cm-2. Results show that proton irradiation followed by annealing at 370 °C can be used for local and controllable reduction of carrier lifetime in SiC devices. The dominant recombination center is the Z1/2defect, whose distribution can be set by irradiation energy and fluence. Proton irradiation substantially improves diode turn-off while its effect on the forward voltage drop and leakage is not so harmful. Comparison of the technology curve for the unirradiated and proton irradiated p-i-n diode then clearly shows that proton irradiation provides a superior tradeoff between the static and dynamic losses.
No takes yet. Share an insight, caveat, or question.
Hazdra et al. (2018) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: