Answers are grounded in this paper and cite their sources.
High-power microwave (HPM) sources, like the magnetically insulated line oscillators (MILOs), backward wave oscillators (BWOs), and coaxial vircators, generate a few GW level of power in the TM01mode. When such modes are radiated by an antenna, they form a null at the boresight. This is undesirable, and mode converters (MCs) are used to convert the TM01mode to a TE11mode, which, when radiated, forms a maxima at the boresight. In this work, the authors report a TM01-to-TE11MC based on a vane-loaded circular waveguide. The vanes are located far from the region ofE-field maxima, so the fields are minimally perturbed. As a consequence, the MC exhibits high bandwidth and high-power handling capability. A method to calculate the dimensions of the MC is presented. Thereafter, as a case study, the design and performance of a 3-GHz MC is presented. Two specific variants of the design are discussed. One is with a perturbed length of3λ gaand a sector angle of 60°. The simulated bandwidth of this MC is 437.95 MHz (14.59%) with a computed power handling capability of 2.056 GW. This is an improvement in the bandwidth and power handling by a factor of 1.34 and 2.8, respectively. The fabrication of this MC is also carried out using rapid prototyping, as only low-power tests were intended. The second variant is with a perturbed length of7λ gaand a sector angle of 105°. The simulated results of the MC indicate a bandwidth of 620 MHz (20.68%) and a power handling of 1.12 GW. This is an improvement in the bandwidth and power handling by a factor of 1.9 and 1.75, respectively.
No takes yet. Share an insight, caveat, or question.
Parmar et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: