This is the authors' abstract. We don't add key points for this paper.
A low-jitter, ring-type voltage-controlled oscillator (VCO)-based injection-locked clock multiplier (ILCM) with a continuous frequency-tracking loop (FTL) for process-voltagetemperature (PVT)-calibration is presented. Using a single replica-delay cell of the VCO that provides the intrinsic phase information of the free-running VCO, the proposed FTL can continuously track and correct frequency drifts. Therefore, the proposed ILCM can calibrate real-time frequency drifts due to voltage or temperature variations as well as static frequency deviations due to process variations. Since the FTL provided an additional filtering of in-band VCO noise, the ILCM was able to achieve excellent jitter performance over the PVT variations, while it was based on a ring-VCO. The proposed ILCM was fabricated in a 65 nm CMOS process. When injection locked, the RMS-jitter integrated from 10 kHz to 40 MHz of the 1.20 GHz output signal was 185 fs. The proposed PVT-calibrator regulated the degradations of jitter to less than 5% and 7% over temperatures and supply voltages, respectively. The active area was 0.06 mm2and total power consumption was 9.5 mW.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Choi et al. (2016) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: