Answers are grounded in this paper and cite their sources.
Solid-particle adhesion is an important factor contributing to the degradation of sealing interfaces, particularly in particle-laden operating environments such as subsea pressure-retaining coring, offshore oil and gas drilling and production, and pipeline transportation. In this study, an equivalent rough-surface reconstruction model incorporating particle adhesion and a three-dimensional finite-element method (FEM) contact model between the seal ring and the reconstructed particle-adhered surface are established. The effects of particle size and coverage on equivalent stress, contact pressure, real contact area, normal contact force, and sealing safety margin are investigated. The results show that the dominant asperities of the original rough surface primarily determine the locations of contact-pressure and equivalent-stress concentrations. Particle adhesion intensifies these local concentrations and results in a more nonuniform load distribution across the sealing interface. Particle size has a markedly greater influence on the interfacial contact state than particle coverage. For a particle size of 1.25 µm, the variations in both real contact area and normal contact force remain within 5%. When the particle size increases to 2.5 µm, the real contact area increases by approximately 9%, while the normal contact force increases by 8–14%. At 5 µm, both the normal contact force and average contact pressure increase by 15–25%. At a coverage of 10%, the safety-margin deviation generally remains below 0.03. For 2.5 µm particles, this deviation increases to approximately 0.09 with increasing coverage, whereas the 5 µm cases exhibit larger overall deviations. This study proposes a particle-adhered equivalent rough-surface reconstruction method that preserves the characteristics of the original rough surface and quantitatively evaluates the effects of particle size and coverage on the sealing contact state, providing a methodological basis for performance evaluation and structural optimization of sealing interfaces operating in particle-laden environments.
No takes yet. Share an insight, caveat, or question.
Zheng et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: