Answers are grounded in this paper and cite their sources.
This study addresses the challenge of improving photovoltaic module performance in hot, arid climates where high solar irradiance, elevated ambient temperatures, and dust substantially reduce electrical and exergy efficiencies. Using Sohar, Oman, as a representative coastal desert site, the work investigates whether combining a simple multi‑position tracking strategy with passive cooling measures can provide a practical performance enhancement without resorting to complex active systems. Four identical PV modules were evaluated side by side. Module 1 was the fixed reference with no tracking or cooling. Module 2 carried the low‐power three‐position tracker only. Module 3 added aluminum fins to the tracked module, and Module 4 further added a TiO 2 ‑PDMS radiative coating on the rear surface. Each configuration was tested outdoors over typical clear days, recording ambient and module temperatures, solar irradiance, and electrical output, and then evaluating electrical, thermal, and exergy efficiencies. The electrical efficiency increment rate for working a full day was 15%, 45.9%, and 69.16% for modules 2, 3, and 4, compared to module 1. Adding fins to the tracking panel reduced its peak temperature by up to 6°C–8°C, and the combined fins and TiO 2 ‐PDMS coating achieved the highest performance, with midday module temperatures reduced by 7°C–10°C lower than the standalone module. For a full‐day operation, the increase rate in electrical exergy efficiency (EEE) compared to module 1 was 14.90%, 44.57%, and 69.43% for modules 2, 3, and 4, respectively. The results demonstrate the passive, low‐cost implementation of a hybrid configuration of three‐position tracking, aluminum fins, and a TiO 2 ‐PDMS rear coating for the first time in a coastal‐desert climate, with up to 69% gains in both electrical and exergy efficiency.
No takes yet. Share an insight, caveat, or question.
Kazem et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: