Answers are grounded in this paper and cite their sources.
This study systematically investigated the microstructural evolution, mechanical properties, and corrosion resistance of Fe–25Mn–12Al–1C–3.5Ni lightweight steel via cold rolling, annealing, and aging. The 15 min‐annealed and aged sample (Age15) achieved an excellent strength–ductility balance at a high strength level (YS ~ 1051 MPa, UTS ~ 1216 MPa, UE ~ 17.5%, and PSE ~ 21.32 GPa·%) owing to dense κ‑carbide precipitation in a recrystallized matrix. The solely 15 min‐annealed specimen (AN15) exhibited the highest corrosion resistance, with the lowest corrosion current density (1.22 × 10 −7 A/cm 2 ) and the largest charge‐transfer resistance, which was associated with its relatively homogeneous recrystallized microstructure and reduced defect density. Therefore, cold rolling followed by 1100 °C/15 min annealing and 600 °C/15 min aging was identified as the optimal route delivering outstanding strength–ductility synergy and good corrosion resistance.
No takes yet. Share an insight, caveat, or question.
Dong et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: