Answers are grounded in this paper and cite their sources.
This study investigates the fabrication and photocatalytic performance of 3D-printed cementitious patterns containing titanium dioxide (TiO2) (TioCem®), produced using an extrusion-based additive manufacturing technique and a wet-on-wet approach. Printed paths with different widths, corresponding to varying fractions of photocatalytically active surface coverage, were fabricated and compared with a fully photocatalytic reference sample. The photocatalytic performance was evaluated under laminar flow conditions using nitrogen oxides (NOx) degradation tests, under UV irradiation at 365 nm. The results demonstrate a linear relationship between NOx removal efficiency and the proportion of active surface area, with photocatalytic degradation efficiencies ranging from approximately 28% for samples with ~50% active coverage to 45.3% for 75% coverage, and 57.9% for the fully active reference sample. The findings indicate that photocatalytic performance can be effectively predicted based on geometric design parameters of the printed patterns. Beyond material performance, the study highlights the potential of 3D printing to integrate photocatalytic functionality with architectural design, enabling the fabrication of customizable photocatalytic patterns on cementitious components during prefabrication using a wet-on-wet approach. This concept offers opportunities for developing environmentally responsive, architecturally expressive, and functionally enhanced building elements, particularly for applications in transport infrastructure and logistics facilities. Its potential extension to the functional modification of existing building surfaces represents a promising direction for future research.
No takes yet. Share an insight, caveat, or question.
Szołdra et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: