Answers are grounded in this paper and cite their sources.
This study presents a modal-based approach for identifying the equivalent material properties of 3D-printed plates with lattice cores without requiring detailed modelling of their internal geometry. Plates with different core infill densities ranging from 20% to 100% were experimentally investigated by modal analysis and represented by a homogenized orthotropic model with square symmetry, characterized by three independent equivalent elastic constants: Young’s modulus, Poisson’s ratio, and shear modulus. These constants were identified by minimizing a weighted objective function combining discrepancies in natural frequencies and mode shapes quantified by the Modal Assurance Criterion, while the modal characteristics of the homogenized plates were calculated using the Ritz method. The identified models showed high agreement with the experimental modal characteristics across all investigated infill densities. Independent identification of the shear modulus enabled the twisting stiffness to be represented without the constraints imposed by isotropy, revealing a non-monotonic dependence of the deviation from isotropic constitutive behavior on core infill density. Comparison with independently optimized isotropic models confirmed that the additional elastic constant improves the prediction of natural frequencies and mode shapes, particularly at intermediate infill densities. Additional finite element analyses highlighted the limitations of using nominal material properties and demonstrated the substantially lower computational cost of the proposed identification approach compared with FE model updating. The methodology provides an efficient means of obtaining experimentally informed equivalent material properties for simplified dynamic modelling of 3D-printed lattice-core structures.
No takes yet. Share an insight, caveat, or question.
Huňady et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: