Answers are grounded in this paper and cite their sources.
We demonstrated a fiber in-line Mach-Zehnder interferometer (MZI) coated with platinum (Pt) for the simultaneous measurement of strain and temperature. The sensor was fabricated by splicing a section of multimode fiber (MMF) between two single mode fibers (SMFs) and the Pt coating was prepared by iron sputtering technology. Fine interference fringes of over 20 dB with a compact size of 20 mm were achieved. The experimental results of the two different resonant dips showed strain sensitivities of -2.06 pm/με and -2.21 pm/με, as well as temperature sensitivities of 55.2 pm/°C and 53.4 pm/°C, respectively. Furthermore, it was found that the Pt coating can improve the strain sensitivity significantly, resulting in an increase of about 54.5%. In addition, the sensor has advantages of easy fabrication, low cost, and high sensitivity, showing great potential for the dual-parameter sensing of strain and temperature.
No takes yet. Share an insight, caveat, or question.
Dong et al. (2018) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: