Answers are grounded in this paper and cite their sources.
Internal design and tab architecture are important factors which affect li-ion cell characteristics such as the internal electrical resistance and heat generation and therefore the thermal behaviour of the cell. This work quantifies the effect of the number of current collecting tabs on the full external temperature distribution of different cylindrical cell formats using a distributed optical fibre temperature measurement technique. Two cell types were tested, namely a Tesla 4680 24Ah cell with a continuous ‘infinite tab’ design and a Molicel P45B 4.5Ah 21700 cell with 2 positive tabs and 3 negative tabs. The 4680 cell showed very high circumferential thermal uniformity with less than a 0.2 °C difference in averaged temperatures over the last 100s of a 0.7C charge and 0.85C discharge. The axial thermal gradient was higher at 3.7 °C and 4.8 °C respectively with the hottest region being measured at the centre of the 4680 cell. Conversely, the P45B showed maximum thermal gradients of 3.7 °C and 5.2 °C on the cell surface under 3C charge and 4C discharge with the region of highest temperature near the positive tab locations as identified by X-ray Computed Tomography (XCT) scans. These results, alongside our previously published work on an LG M50 single tabbed cell, identify reduced hotspot localisation on the cell surface as the number of tabs increase with tabbed locations representing the areas of highest surface temperature. This work highlights the value of new battery metrology methods linked to optimised integration, cell management and the creation of mathematical models of performance and ageing.
No takes yet. Share an insight, caveat, or question.
Guo et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: