Answers are grounded in this paper and cite their sources.
SiC particles (SiCp)-reinforced Al–Si matrix composite coatings were synthesized on 4032 aluminum alloy by laser cladding using powder mixtures of Al-20 wt.% Si alloy and electroless copper-plated SiC particles (SiCp-Cu). The effects of SiCp-Cu content on microstructure, phase composition, and microhardness of the SiCp/Al–Si laser cladding layer (LCL) were investigated systematically. The results showed that the microstructure of SiCp-Cu/Al–Si LCL was mainly composed of undissolved SiCp, lump-like primary Si, lump-like Al2Cu, plate-like Al4SiC4, and Al–Si–Cu ternary eutectic. In addition, the eutectic microstructure became finer with the increasing of SiCp-Cu content. The average microhardness of the LCL increased with the increasing of SiCp-Cu content. When SiCp-Cu content was 50 wt.%, the average microhardness of the LCL reached 508 HV0.05, which was about 3.5 times larger than that of the substrate. The LCL reinforced with a SiCp-Cu content of 30 wt.% exhibits the best wear resistance.
No takes yet. Share an insight, caveat, or question.
Liu et al. (2019) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: