Answers are grounded in this paper and cite their sources.
This research paper employed the recently developed Elium thermoplastic resin and basalt fabrics as an alternative to thermoset/synthetic fibre composites to reduce their environmental impact. Elium® 191 XO/SA and Epoxy PrimeTM 37 resin were reinforced with mineral-based semi-unidirectional basalt fibre (BF). Physical, chemical, tensile, and flexural performance was investigated under the effect of hydrothermal seawater ageing at 45 °C for 45 and 90 days. The results show that the BF/Elium composite exhibited superior tensile and flexural strength, as well as good stiffness, compared with the BF/Epoxy composite. Digital images and scanning electron microscope images were used to describe the fracture and failure mechanisms. The tensile and flexural strength values of the BF/Elium composite were 1165 MPa and 1128 MPa, greater than those of the BF/Epoxy composite by 33% and 71%, respectively. The tensile and flexural modulus values of the BF/Elium composite were 44.1 GPa and 38.2 GPa, which are 30% and 12% greater than those of the BF/Epoxy composite. The result values for both composites were normalised with respect to the density of each composite laminate. Both composites exhibited signs of resin decomposition and fibre surface degradation under the influence of seawater ageing, resulting in a more recognisable reduction in flexural properties than in tensile properties.
No takes yet. Share an insight, caveat, or question.
Alsaadi et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: